On floors and high impact surfaces, 3 coats should be applied with a trowel, a shorthair roller (velour), or with a polishing machine.įirst coat: 1 liter (1.06 quart.) undiluted covers appr. 1 teaspoon per m², should be polished in immediately. The 3rd coat should, after spreading little drops, approx. The wet films by the 1st and the 2nd coats should be polished in with an eccentric sander, a polishing machine or a lint-free cloth after about 10 to 15 minutes. By furniture with a pad, a fleece or something similar to at least 280 grain. Sand after the 1st coat to reach an especially smooth, high impact surface. Always do a test application! Depending on surface requirement, absorbency and kind of wood: apply 1 - 3 thin coats until a coating layer has developed. Stir thoroughly! Remove possible skin formed on surface. By spraying, dipping, with a cloth or with machine applications at temperatures above 16☌ (61☏). Application method: By brush, troweling or with a shorthair roller (velour).Sand gradually and in accordance with the gradation, for furniture up to 240 grain, for floors up to 120 grain with a rollercoater sander (a sander with a sandpaper grinder), and then up to 180 grain with a grit. For large-pored woods such as walnut, oak, ash, chestnut, elm, mahogany or teak, brush out pore grooves carefully. Preparation: Wood must be dry (moisture content below 12 %), solid, able to absorb, clean, free of resin and dust.Full declaration: Differs according to color tone: Linseed oil, linseed oil - stand oil - natural resin ester, linseed-oil - wood oil - stand oil, highly transparent iron oxide, titanium dioxide, natural resin glycerol ester, linseed oil - stand oil, orange oil, isoaliphates, silicic acid, micronized wax, pine oil, rosemary oil, dehydrated amino sugar and drying agents free of lead.DIN EN 71 Part 3 certified, suitable for toys. German Industrial Norm DIN 53 160 certified for color fastness when exposed to perspiration and saliva. Water repellent according to German Industrial Norm DIN 68 861, part 1. Produces a matt film after 1 coat and a satin glossy finish after 2 - 3 coats. Technical qualities: Reinforces and deepens the natural color of the wood grain. Not to be used on cabinet interiors, or for the treatment of plywood. Suitable for furniture, window sills, floors, for OSB and for MDF.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |